1 technical data sheet mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 confguration connector mhv female connector specifcation mil-c-39012 connector interface type rg213,rg214,rg8,rg9,rg1 1,rg225,rg393 cable attachment method (shield/contact) clamp/solder body style straight electrical specifcations impedance, ohms 50 mechanical specifcations temperature operating range, deg c -65 to +165 size length, in [mm] 1.53 [38.86] width/dia., in [mm] 0.75 [19.05] . weight, lbs [g] 0.082 [37.19] connector type mhv female contact material and plating silver contact plating specifcation qq-s-365 body material and plating brass, nickel dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 PE4373 PE4373 PE4373 rev mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393
2 technical data sheet plotted and other data notes: v alues at 25 c, sea level mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 PE4373 url: http://www.pasternack.com/mhv-female-standard-rg213-rg214-rg8-rg9-rg11-rg225-rg393-connector-PE4373-p.aspx mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 PE4373 PE4373 rev
? 2013 pasternack enterprises all rights reserved 3 PE4373 rev scale n/a dwg title cad file 2233 fscm no. 53919 rev. - 051002 size a PE4373 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. slide clamp nut (1), washer (2) & gasket (3) over cable. strip cable as shown. do not nick braid while cutting jacket. taper end of braid to permit assembly of braid clamp (4). slide braid clamp (4) over braid & seat against cable. 2. form braid over clamp nut (4). trim braid back to shoulder. cut dielectric & center conductor to dimension shown. do not nick center conductor. solder contact to center conductor. remove excess solder. do not over heat dielectric. insert cable assembly into body & tighten. assembly procedures mhv female connector clamp/solder attachment for rg213, rg214, rg8, rg9, rg11, rg225, rg393 PE4373 cad drawing
|
